|
The Historical PZL P.11c is an American homebuilt aircraft that was designed and produced by Historical Aircraft Corporation of Nucla, Colorado. The aircraft is a 66% scale replica of the Polish PZL P.11c fighter and when it was available was supplied as a kit for amateur construction.〔Purdy, Don: ''AeroCrafter - Homebuilt Aircraft Sourcebook, Fifth Edition'', page 177. BAI Communications, 15 July 1998. ISBN 0-9636409-4-1〕 ==Design and development== The aircraft features a strut-braced high-wing, a single-seat open cockpit with a windshield, fixed conventional landing gear and a single engine in tractor configuration.〔 The aircraft is made from welded steel tubing and wood, with its flying surfaces covered in doped aircraft fabric. Its span wing employs a NACA 2412 airfoil and has a wing area of . The cockpit width is . The standard engine used is the CAM 100 four stroke powerplant.〔 The aircraft has a typical empty weight of and a gross weight of , giving a useful load of . With full fuel of the payload for the pilot and baggage is .〔 The kit included prefabricated assemblies, the engine and scale fixed pitch propeller, basic VFR instruments, fabric and even paint. Also included were replica 7.9 mm machine guns and a ring gun site. The manufacturer indicated that the design was intended for novice builders and estimated the construction time from the supplied kit as 1400 hours.〔 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「Historical PZL P.11c」の詳細全文を読む スポンサード リンク
|